|
|
Using Advanced xBSD Based Servers for High School
Zadina, Martin ; Michal, Bohumil (referee) ; Kašpárek, Tomáš (advisor)
This work is about setting up Samba software on server with operating system from BSD family to primary domain controller rule in the high school computer network environment with Microsoft Windows stations. After introduction to Samba software there is examined problem of Windows network based on SMB protocol. There are described steps that are necessary to setup Samba software, disk sharing services, creation of user accounts and adding client stations to domain trust. At the next there is described problematic of network printing in the Windows environment, print servers and the solution with classical printing support in FreeBSD and CUPS printing support. In the next part there is described mass installation procedure of Windows stations with same hardware configuration. At the finish, there are noticed some tasks that are necessary for next operation of installed system.
|
|
|
The PXA270M ARM module and its usage as private branch exchange
Vojtíšek, Jindřich ; Šilhavý, Pavel (referee) ; Daněček, Vít (advisor)
This work deals with using the operating system Linux on diskless devices. This is solved on the development kit Voipac PXA270M, which is based on the ARM processor. This work deals further with the distributions of the Linux operating system, which are suitable to use for the device based on the ARM processor. The Linux was chosen because it is one of the most flexible operating systems and the Linux is kept as open source software code, except to the distribution of the Red hat and a few special distributions. The NFS protocol and TFTP are described there. The TFTP and NFS are used to deploy the operating system. It describes there, what are the TFTP and NFS and the principle of their use in computer networks. Practical part is as to, what is needed for the functioning of the TFTP and NFS server on the Ubuntu 11.10 plus how configure them. The OpenOCD is another part of this work. The OpenOCD is designed to work in the device memory. There is shown how to install and run the OpenOCD in order to communicate with the development kit Voipac PXA270M. This work shows how to configure the bootloader U-boot for booting the operating system from the network using the NFS and TFTP. There is described how compile and install PBX Asterisk on Voipac PXA270M with use of cross compiler and how cross compile zlib, OpenSSL and ncurses needed to install nad run Asterisk.
|
|
|
Parallelization of Integer Factorization from the View of RSA Breaking
Breitenbacher, Dominik ; Henzl, Martin (referee) ; Homoliak, Ivan (advisor)
This paper follows up the factorization of integers. Factorization is the most popular and used method for RSA cryptoanalysis. The SIQS was chosen as a factorization method that will be used in this paper. Although SIQS is the fastest method (up to 100 digits), it can't be effectively computed at polynomial time, so it's needed to look up for options, how to speed up the method as much as possible. One of the possible ways is paralelization. In this case OpenMP was used. Other possible way is optimalization. The goal of this paper is also to show, how easily is possible to use paralelizion and thanks to detailed analyzation the source codes one can reach relatively large speed up. Used method of iterative optimalization showed itself as a very effective tool. Using this method the implementation of SIQS achieved almost 100 multiplied speed up and at some parts of the code even more.
|
|
|
Advanced Tools for Performance Measurement
Smrček, Jaromír ; Gajda, Zbyšek (referee) ; Kašpárek, Tomáš (advisor)
This thesis presents the I/O layer of Linux kernel and shows various tools for tuning and optimization of its performance. Many tools are presented and their usage and outputs are studied. The thesis then focuses on the means of combining such tools to create more applicable methodology of system analysis and monitoring. The practical part consists of applying SystemTap scripts for blktrace subsystem and creating a fragmentation monitoring tool with graphical output.
|
|
|
Using Advanced xBSD Based Servers for High School
Zadina, Martin ; Michal, Bohumil (referee) ; Kašpárek, Tomáš (advisor)
This work is about setting up Samba software on server with operating system from BSD family to primary domain controller rule in the high school computer network environment with Microsoft Windows stations. After introduction to Samba software there is examined problem of Windows network based on SMB protocol. There are described steps that are necessary to setup Samba software, disk sharing services, creation of user accounts and adding client stations to domain trust. At the next there is described problematic of network printing in the Windows environment, print servers and the solution with classical printing support in FreeBSD and CUPS printing support. In the next part there is described mass installation procedure of Windows stations with same hardware configuration. At the finish, there are noticed some tasks that are necessary for next operation of installed system.
|
|
|
The PXA270M ARM module and its usage as private branch exchange
Vojtíšek, Jindřich ; Šilhavý, Pavel (referee) ; Daněček, Vít (advisor)
This work deals with using the operating system Linux on diskless devices. This is solved on the development kit Voipac PXA270M, which is based on the ARM processor. This work deals further with the distributions of the Linux operating system, which are suitable to use for the device based on the ARM processor. The Linux was chosen because it is one of the most flexible operating systems and the Linux is kept as open source software code, except to the distribution of the Red hat and a few special distributions. The NFS protocol and TFTP are described there. The TFTP and NFS are used to deploy the operating system. It describes there, what are the TFTP and NFS and the principle of their use in computer networks. Practical part is as to, what is needed for the functioning of the TFTP and NFS server on the Ubuntu 11.10 plus how configure them. The OpenOCD is another part of this work. The OpenOCD is designed to work in the device memory. There is shown how to install and run the OpenOCD in order to communicate with the development kit Voipac PXA270M. This work shows how to configure the bootloader U-boot for booting the operating system from the network using the NFS and TFTP. There is described how compile and install PBX Asterisk on Voipac PXA270M with use of cross compiler and how cross compile zlib, OpenSSL and ncurses needed to install nad run Asterisk.
|
|
|
Advanced Tools for Performance Measurement
Smrček, Jaromír ; Gajda, Zbyšek (referee) ; Kašpárek, Tomáš (advisor)
This thesis presents the I/O layer of Linux kernel and shows various tools for tuning and optimization of its performance. Many tools are presented and their usage and outputs are studied. The thesis then focuses on the means of combining such tools to create more applicable methodology of system analysis and monitoring. The practical part consists of applying SystemTap scripts for blktrace subsystem and creating a fragmentation monitoring tool with graphical output.
|
|
|
Parallelization of Integer Factorization from the View of RSA Breaking
Breitenbacher, Dominik ; Henzl, Martin (referee) ; Homoliak, Ivan (advisor)
This paper follows up the factorization of integers. Factorization is the most popular and used method for RSA cryptoanalysis. The SIQS was chosen as a factorization method that will be used in this paper. Although SIQS is the fastest method (up to 100 digits), it can't be effectively computed at polynomial time, so it's needed to look up for options, how to speed up the method as much as possible. One of the possible ways is paralelization. In this case OpenMP was used. Other possible way is optimalization. The goal of this paper is also to show, how easily is possible to use paralelizion and thanks to detailed analyzation the source codes one can reach relatively large speed up. Used method of iterative optimalization showed itself as a very effective tool. Using this method the implementation of SIQS achieved almost 100 multiplied speed up and at some parts of the code even more.
|
guest ::
